Page
57
Dante
TM
Device Setup
The iVAM1-1’s default
Dante Device Name
is “Wohler- …” followed by the last 6
digits of the Dante port MAC address, as shown in Figure B-3. This name can be
changed by the Dante Controller to appear that way on the network, but that will
not change the iVAM1-1’s unit name appearing on GUI pages and iVAM1-1
Remote
Metering
or
Discovery
pages.
Figure B–3: iVAM1-1 Name
During initial setup, you may want to manually change the iVAM unit
Name
in the
System Setup
page to match the reassigned
Dante Device Name
for consistency.
Refer to Figure B-4.
Figure B–4: Rename iVAM
Change the iVAM
AoIP Name
Other changes such as
Latency
settings can be made by the Dante Controller
