Wohler A 550 Скачать руководство пользователя страница 33

Страница: 33 / 79

Using the Analyzer

6.3.2 Selecting the fuel

Fig. 29: Fuel options

The selected fuel is shown in the topline on the left

of the readings screen.

•

Click on the fuel key to enter the fuel options

menu.

Optional fuels as below:
Natural gas, Fuel Oil 2, Fuel Oil 4, Fuel Oil 6, Bio-

fuel, LPG, Propane, Kerosene, Digester Gas, Coal,

Wood, Pellets and four user defined fuels

NOTE!

To see all fuels scroll by drawing your finger over

the screen.

•

Click on a fuel. The fuel will be selected for the

next measurement.

•

After turning off and on the analyzer, the last

selected fuel will be active again.

6.3.3 Setting the fuel param-

eters

The reference oxygen and the Lamda threshold

values of all fuels can be individually set.
All parameters can be set for the user defined

fuels.

•

Click on the “Fuel data” icon to control or

change the fuel parameters. The “Fuel data”

icon will turn green.

•

Click on the fuel whose parameters are to be

changed.

•

The analyzer enters the fuel parameter menu.

Change the parameters and confirm with

"OK".

Содержание A 550
















































































Результаты поиска

Содержание A 550

Отзывы:

Похожие инструкции для A 550

Бренды по названию

Популярные бренды

Wohler A 550, Руководство по эксплуатации

Результаты поиска

Содержание A 550

Отзывы:

Похожие инструкции для A 550

Бренды по названию

Популярные бренды