© wodtke GmbH - Tübingen.
IR_BA_190726
Page 18 / 64
Installation • Handover
9.3 Power supply
WARNING Electrocution
Carry out all electrical connection and installation
work in accordance with relevant regulations.
!
Material losses
The specified voltage must match the mains voltage.
f
f
Observe the type plate.
!
Material losses
This appliance is unsuitable for fixed electrical cables.
f
f
Connect the appliance to a suitable socket.
Note
The power cable must only be replaced (for example if
damaged) by a qualified contractor authorised by the
manufacturer, using an original spare part.
The appliance is delivered fully wired. The following electrical
connections are permissible:
IR...300-900
Connection to a freely accessible standard socket with
matching plug
X
Permanent connection to an appliance junction box
with earth conductor
X
9.3.1 Connection to a standard socket
f
f
Plug the appliance into a standard socket.
Note
You can push excess cable back into the space be-
tween the rear panel and wall.
9.3.2 Permanent connection
WARNING Electrocution
In the case of a permanent connection, the appli-
ance must be able to be separated from the power
supply by an isolator that disconnects all poles with
at least 3 mm contact separation.
!
Material losses
- Trim the power cable so it leads directly to the ap-
pliance connection socket.
- Ensure that, after trimming the power cable, the
appliance can still be removed from the wall with-
out a problem.
f
f
Trim the power cable by cutting off the plug.
f
f
Connect the power cable to a suitable socket.
10. Handover
f
f
Explain the functions of the appliance to the user. Draw
special attention to the safety instructions.
f
f
Hand over the operating and installation instructions to
the user.
11. Maintenance
The appliance contains no serviceable parts.
12. Specification
12.1 Dimensions and connections
a20
a10
a30
D
00000
55
93
9
IR...300
IR...500
IR...700
IR...900
a10 Appliance Height
mm
600
600
600
600
a20 Appliance Width
mm
600
1000
1400
1800
a30 Appliance Depth
mm
49
49
49
49
12.2 Minimum clearances
≥100
≥100
≥100
≥500
≥100
D
00000
55
94
0
