© wodtke GmbH - Tübingen.
IR_BA_190726
Page 17 / 64
ENGL
IS
H
Installation • Installation
9.2.2 Retaining bracket
The appliance is supplied with a retaining bracket to prevent
the wall mounted appliance from moving or tilting.
Two mounting holes for the retaining bracket are already pre-
punched into the rear panel. These mounting holes are each
provided with a fixing screw for the retaining bracket.
D
00000
55
94
4
2
3
1
1 Pre-punched mounting hole
2 Retaining bracket
3 Fixing screw
- If you mount the appliance horizontally, attach the retain-
ing bracket to the long edge of the appliance.
- If you mount the appliance vertically, attach the retaining
bracket to the short edge of the appliance.
9.2.3 Wall mounting bracket installation
Note
Use the wall mounting bracket as a drilling template
when marking the fixing holes.
f
f
Attach the wall mounting bracket to the wall
using one horizontal slot and one vertical slot.
Note
The screws and rawl plugs are not part of the standard
delivery.
f
f
Use appropriate fixing materials.
65
D
00000
58
66
1
f
f
Determine the position of the appliance. Mark the centre
of the top edge of the appliance on the wall.
f
f
Starting from the centre of the top edge of the appliance,
mark the fixing holes for the wall mounting bracket on the
wall.
f
f
Drill the fixing holes for the wall mounting bracket.
f
f
Secure the wall mounting bracket on the wall.
f
f
Adjust the position of the wall mounting bracket until it is
horizontally level. The horizontal and vertical slots in the
wall mounting bracket enable alignment if drilled holes
are not completely accurate.
9.2.4 Fitting the retaining bracket
D
00000
58
31
0
1
1 Retaining bracket
f
f
Attach the retaining bracket to the rear panel using the
fixing screw provided.
D
00000
55
94
1
1
2
1 Wall mounting bracket
2 Retaining bracket
!
Material losses
Ensure that the power cable is not pinched or dam-
aged when you hook in the appliance.
We recommend that you fully extend the power cable
before wall mounting.
f
f
Hook the appliance centrally onto the wall mounting
bracket.
f
f
Mark the fixing hole for the retaining bracket on the wall.
f
f
Lift the appliance off the wall mounting bracket.
f
f
Drill the fixing hole for the retaining bracket.
9.2.5 Hooking the appliance into place
f
f
Hook the appliance centrally onto the wall mounting
bracket.
f
f
Lock the appliance in by securing the retaining bracket to
the wall.