WMF 1300 S Скачать руководство пользователя страница 13

Страница: 13 / 136

User Manual WMF 1300 S

Safety

Installation location

• The device can be used as a self-service device if it is supervised

by trained personnel.
The machine must be set up so as to allow good visual access.

• The device must be placed and levelled on a horizontal, sturdy,

water-resistant, and heatproof base.

• The device must not be cleaned using a water jet. The device

must be installed where it is protected against water spray.

• The device must not be located on a surface that is sprayed or

cleaned with a water hose, steam jet, steam cleaner, or similar
devices.

Constant water supply

(optional, with constant water model)

• 3/8 inch hose connector with water mains tap, and dirt filter

with 0.003 in (0.08 mm) mesh size, on-site. At least 29 psi
(0.2 MPa/2 bar) supply pressure at 0.53 gal/min (2 l/min).
Maximum 87 psi (0.6 MPa/6 bar).

Important.

If the customer’s on-site flow pressure exceeds

87 psi (0.6 MPa/6 bar), then a pressure reducer must absolutely
be connected upstream and set to a maximum of 87 psi
(0.6 MPa/6 bar).

Содержание 1300 S









































































































































Результаты поиска

Содержание 1300 S

Отзывы:

Похожие инструкции для 1300 S

Бренды по названию

Популярные бренды

WMF 1300 S, Руководство пользователя

Результаты поиска

Содержание 1300 S

Отзывы:

Похожие инструкции для 1300 S

Бренды по названию

Популярные бренды