manualshive.com logo in svg

WMF 1300 S, Руководство пользователя

Поделиться
Скачать
WMF 1300 S Скачать руководство пользователя страница 65

65

User Manual WMF 1300 S

Software | Operating options

Logo

Manufacturer's logo

Options:

•  active

•  inactive

Default value:

active

active The manufacturer's logo is shown at the top 

right of the “Ready to operate” display.

Customer’s logo

Options:

•  active

•  inactive

Default value:

inactive

active If the customer logo is set to “active,” and 

a customer’s logo has been loaded, then the 
customer logo will be displayed centered 
in the header (ready to operate display). 
If vending machines are connected, then the 
customer’s logo is displayed on the left. In this 
case, both logos cannot be displayed at the 
same time.

Load customer's logo

Insert the USB stick containing the customer’s logo. 
Load the customer’s logo.

Size of customer’s logo

The logo must not be greater than 80 pixels high. 
Larger logos will be scaled to this size automatically.

Содержание 1300 S









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды