WMF 1300 S Скачать руководство пользователя страница 14

Страница: 14 / 136

User Manual WMF 1300 S

Safety

• Maximum inlet temperature 95 °F (35 °C).
• The set of hoses provided with the new coffee machine,

the permanent water connection kit, or the new water filter
must be used. Do not use the old set of hoses.

Ambient temperature

• Ambient temperature 41 °F (5 °C) to a maximum of 95 °F

(35 °C)

Usage

• The use of the device is subject to this User Manual. Any other

use or use that goes beyond the aforementioned is considered
incorrect use. The manufacturer shall not be liable for any
damage resulting from this.

•

Under no circumstances may the WMF 1300 S be used

to dispense and heat liquids other than coffee, hot

water (beverages, cleaning) or milk (cooled, pasteurized,

homogenized, UHT).

Hygiene

• The coffee machine must be set up by the operator such that

care and maintenance can be performed without hindrance.

• In office / floor kitchen areas or similar self-service set-ups,

only staff instructed in operation of the coffee machine should
supervise the coffee machine. Trained personnel should carry
out care procedures and be available for questions regarding
use.

Содержание 1300 S









































































































































Результаты поиска

Содержание 1300 S

Отзывы:

Похожие инструкции для 1300 S

Бренды по названию

Популярные бренды

WMF 1300 S, Руководство пользователя

Результаты поиска

Содержание 1300 S

Отзывы:

Похожие инструкции для 1300 S

Бренды по названию

Популярные бренды