WMD Metron, Руководство пользователя

Страница: 16 / 51

4.2.1 Quick Burst / Quick Gate
The user can quickly enter burst steps without ever leaving Compose Mode by
holding the [MATRIX] step and turning ENCODER 2. The burst type will show on
the CURRENT STEP display.
A similar function is also extended to gates that allows the user to quickly enter
long gates. Hold the corresponding [MATRIX] step and turn ENCODER 1. Turning
the encoder to the left will make a gradually decreasing gate on the held step.
Turning to the right will set the step to 100%. Continuing to turn the encoder
will push 100% gates to the following steps extending to a multi-step gate.
Hold a [STEP] and turn
ENCODER 1 to quickly set gates.
Turn left for smaller than 100%.
Turn right to extend a 100% gate
to the following steps.
Hold a [STEP] and turn
ENCODER 2 to quickly
set bursts.
15
4. BASIC FUNCTIONS
This can be any step
in the MATRIX.