WMD Metron, Руководство пользователя

Страница: 42 / 51

9.1 ASSIGN FUNCTIONS
9. ASSIGNABLE INPUTS
41
See the chart on the next page for a full list of functions. Functions labeled
(A) will take place as soon as they are triggered. Functions labeled (B) will
be queued up to occur in sequence as soon as they are triggered. Functions
labeled (C) will take place at the next clock step after they are triggered.
Functions labeled (D) will be queued up to occur in sequence at the next clock
step.
Loop:
If Assign 1 and 2 are both set to loop, Assign 2 will act as a loop start offset.
The voltage level on Assign 2 at the point the loop is enabled will be the new
Q offset voltage for the loop.
Roll:
Roll start point is set when the roll is enabled. A new start point is not
selected until the loop is disabled and re-enabled.
!
If Assign 1 and 2 are both set to loop, Assign 2 will act as a loop start
offset.