Then the following window appears, where you can setup the compatiblity by selection buttons as
Meter type (
MBUS or Pulse) / Data sending method: FTP orTCP)
#Step 7: By selection of the listed tabs you can modify the parameter groups here:
-
Validity
-
Communication settings: cellular network settings, selection of APN, server port and
IP address
-
Extended configuration: alarm settings, life signal checking, meter compatibility,
data sending schedule
- Templates and other info: XML / JSON compatible unique template creation
- Firmware: setting up the software refresh
3.4 Required settings
#Step 1: Configure the following fields on the Communication settings tab:
-
APN
-
APN password (if exists)
-
SIM PIN (if the SIM uses a PIN code)
