WM Systems Universal Industrial RS485 Modem, Руководство пользователя

Страница: 31 / 52

2. The Device Manager push enable option allows the modem to send status messages (by
configurable cycles/intervals) to the Device Manager ® software.
3.
The Device Manager server IP address and Device manager server port (nr. 443 by
default) must be added for proper connection.
4. The Device Manager push interval is used to define the status message sending cycle (in
seconds).
Important ! When you have set all this, the DM connection will not automatically be useable,
you still need to configure the Device Manager ® side of the settings. You will find more
information about the exact sequence of the settings in the Device Manager ® manual – ask
our sales department.
5. Push the OK button and continue with the next part.
The further certification and security fields cannot be selected for this modem.
5.7 Send the configuration to the modem
Note that the configured settings will NOT be saved automatically or sent to the
modem!
To send/write parameters to the modem, you have to push the Parameters write icon.
Then the parameter values will then be sent to the device.
The right bottom progress indicator bar will show the percentage of the writing.
At the finish of the process, the modem will be restarted by the new settings. Afterall you can
use the modem with the connected external measurement device and the transparent data
transmission vie the cellular network.