➢
C
–
DIN-rail sleede for fixation
➢
D
–
DIN-rail position holder (release/fixate)
➢
E
–
Additional hooks for fixation to wall/mount
Please note that close metal parts, the cabinet metal material and the industrial conditions as
the usage of high rate power or other external gained radio frequency signals can cause radio
signal disturbance and could cause weak wireless signal at reception or data transmitting or
could cause less effective signal reception, weak wireless fidelity. In any of these, we recommend
you to test the wireless signal reception and quality and if it is necessary use external, magnetic
mount antenna which is leaded outside
of the cabinet and placed onto the cabinet’s surface –
to ensure enough reception.
1.4
Cabling, wiring
1.
Remove the plastic, transparent port protector
(No. 15) part by releasing the two
screws (No. 14) from the top of the enclosure and slide up the plastic part, then remove
upside.
Now you can free to connect
wires and cables to the ports
and interfaces.
2.
Mount a 4G LTE antenna
to
the
ANT Main
titled (no. 12)
SMA antenna connector and
mount an recommended to
also using a secondary
antenna also and mount to the
ANT Diversity
(no. 13) SMA
connector. Twist the antenna
to the connector until it is
fastened.
You can use LTE wireless antenna with 3-6dB, 9dB or more gained versions. RG174 cable
SMA antenna with magnetic mount can be also using for external usage.
The
antenna
must be placed and oriented that it should has a some clearance in any
direction.
14
14
15
