1.
Wiring and Preparation
1.1
Description of interfaces
➢
1
–
Power supply connector ~100-230V AC, 50Hz (4-pins terminal block), pinout (left to
right): L, N, -, PE
➢
2
–
micro SD card slot (for micro-SD card, for alternative micro-SD boot or data storage)
➢
3
–
micro-USB connector (PC connection - USB LAN bridge - for configuration, debug)
➢
4
–
Primary SIM-card slot (2FF-type mini SIM card, push-insert) for LTE 4G module
➢
5
–
Secondary SIM-card slot (2FF-type mini SIM card, push-insert)
–
active in case of
presence of the optional LTE450, LTE Cat.M/Cat.NB module
➢
6
–
Ethernet LAN1 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
➢
7
–
Ethernet LAN2 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
➢
8
–
Ethernet LAN3 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
➢
9
–
Ethernet LAN4 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
➢
10
–
Industrial terminal block (isolated RS485 port (upper 3-pins), M-Bus connector (middle
3-pins), 2 digital inputs (lower 3-pins))
➢
11
–
Reset button
–
has multiple features, see
Reset features chapter later
2
13
3
4
8
9
10
12
11
1
6
7
5
L N - PE
