Digital inputs:
Cable type: 3 + 3x LgY 0.75 mm2, signed by color, blanked
cables for data connection
Connection type: 3-pins terminal block
Pinout (from left-to-right): DI1 (input #2), DI0 (input #1),
GND (ground)
Function: receiving 2 digital inputs of external devices
microUSB-USB configuration cable:
Type: micro-USB-USB cable
Connector típe
: USB 2.0 micro Type B connector
Function: alternative LAN bridge (USB LAN) for configuration
–
connecting to computer
1.5
Important notes
•
The
4G LTE
modules can be used by inserting SIM card into the
SIM1
tray
•
For the
SIM2
tray you can use
LTE 450
Cellient MPL-200 module or an
LTE Cat.M1 /
Cat.NB2
Quectel module - which is connecting on the internal miniPCI-Express 2.0 slot.
These modules can only work with an LTE450, Cat.M, Narrow Band (NB-IoT) compatible SIM
card that can be inserted into the
SIM2
slot. (In this case, only the SIM2 slot can be used.)
Please pay attention to the use the
SIM2
tray, the chip is facing up.
•
The
IPv6 protocol
is disabled for the LAN interfaces by default, change it if you want to
use it instead of the IPv4 protocol. Use the
Network / Interfaces
menu
LAN1
..
LAN4
interface and the IPv6 relevant fields.
•
You have to use two
4G LTE antenna
for the stable wireless network operation. You can
check the signal reception and wireless availability in the
Overview
menu.
•
The available APN settings will be assured by the SIM card provider mobile operator or your
mobile internet service provider. Ask them about
APN
, password,
SIM
PIN
and further
necessary information for the configuration.
•
When configuring the
SIM
or
APN
settings, after the saving the device, it will not restart the
modem automatically with the new settings. You need to restart the modem by the
Restart
WAN
button in the OpenWrt
®
menu at
Network / Modem settings
.
•
The device is able to receive max. 32 connected
RS485
devices.
•
The device is able to receive max. 30 connected
MBus
compatible meters.
RS485
MBUS
2DI
