First you can see the
Phone Book
where you can define or
phone numbers.
Then you have to
Enable
the selected phone number.
At the
SMS commands
part you can choose preset commands by selecting them for the number.
In the case of an SMS from a preset phone number, the device runs the preset command (s)
assigned to the phone number: e.g.
Reboot
For other commands, the device returns the information in a reply SMS message (e.g. when sending
the “
info
” command
in SMS, the device sends the firmware version number and the elapsed time
since the last boot info to the phone where the SMS has been sent).
When you have changed something, press the
Save & Apply
button to save the settings.
