To enable DHCP, uncheck the
Ignore interface
option. The fields required for DHCP configuration
and their default values are displayed.
The
Start
field means the starting address within the subnet used by the router (in our case
192.168.x…).
Use the
Limit
field to limit how many IP addresses are assigned. That is, the router on subnet
192.168.x will assign IP addresses in the address range between
Start
and
Start + Limit
to the
devices that want to connect.
Further settings can be achieved at the
Advanced Settings
tab
(as dynamic DHCP,
IPv4 Netmask).
Save your settings with the
Save & Apply
button.
