Copyright © WIZnet All Rights Reserved
WIZ110SR | 27 page
that WIZ110SR will use.
STEP4
: Set the Baud rate as WIZ110SR.
STEP5
: Execute another Hyper terminal, and open the TCP/IP(Winsock) for setting IP and Port.
STEP6
: Type some characters at the screen of serial Hyper terminal. For example,
“01234567890” is input.
STEP7
: The input characters of STEP 6, is displayed in the screen of network Hyper terminal.
(Checking
“Serial to Ethernet” function)
STEP8
: You can check
“Ethernet to Serial” function by inputting some character in the screen of
Network terminal and checking them in the serial terminal.
Above function can be tested by Device Terminal program that WIZnet is providing.
Figure 15. Device Terminal
