Wiznet WIZ110SR, Руководство пользователя

Страница: 23 / 31

Copyright © WIZnet All Rights Reserved WIZ110SR | 23 page
Command Parameter Comments
RY PPPoE ID PPPoE ID Check
RZ PPPoE Password PPPoE Password Check
RI IP Address Get Local IP
RS Subnet Mask Get Subnet mask
RG Gateway address Get Gateway
RP Local Port Number
Get Local IP‟s port number
RD 0 : Static, 1 : DHCP, 2 : PPPoE Get the IP configuration method
RM 0 :TCP Client, 1 :TCP Mixed, 2 :TCP Server Get the operation mode
RK 0 : TCP, 1 : UDP Get the Protocol
RB
XXXX
eg. [Baudrate]1: 115200, 2: 57600,
3: 38400, 4: 19200, 5: 9600,
6: 4800, 7: 2400,8: 1200
[data byte] 7 : 7bit, 8bit
[parity] 0 : no parity, 1 : Odd, 2 :Even
[Flow] 0 : no, 1 : Xon/Xoff, 2 :RTS/CTS
Get the serial baud rate
RT 0 : Disable, 1 : Enable Get the serial command method
RE xxxxxx (eg. In hex format : 2B 2B 2B) Get the command mode character
RF x.x (eg. 3.1) Get the firmware version
RX xxx.xxx.xxx.xxx (eg. 192.168.11.144) Get the server IP address
RN 0~65535 Get the server port number
QC XX Get delimiter character in hex
QS 0~255 Get delimiter size
QT 0~65535 Get delimiter time
QI 0~65535 Get Inactivity timer value
Table 7. Serial Configuration Command Code