Copyright © WIZnet All Rights Reserved
WIZ110SR | 11 page
ⓔ
Local IP/Port
:
WIZ110SR‟s IP address and Port number for network connection
☞
Be sure to input correct network information. If you input incorrect IP address, it can
cause network collision or mal-function.
ⓕ
Subnet :
WIZ110SR‟s subnet mask
ⓖ
Gateway
: WIZ110SR‟s Gateway address
ⓗ
PPPoE ID/Password :
If you select „PPPoE‟ mode, input ID/Password which you received
from ISP company.
ⓘ
Server IP/Port :
When WIZ110SR is set as “Client mode” or Mixed mode”, server IP and
port should be set. WIZ110SR attempts to connect this IP address.
ⓙ
Network mode :
client/server/mixed
: This is to select the communication method based on TCP. TCP is the
protocol to establish the connection before data communication, but UDP just processes the
data communication without connection establishment.
The Network mode of WIZ110SR can be divided into TCP Server, TCP Client and Mixed
mode according to the connection establishing method. At the TCP server mode, WIZ110SR
operates as server on the process of connection, and waits for the connection trial from the
client. WIZ110SR operates as client at the TCP Client mode on the process of connection,
and tries to connect to the server’s IP and Port. Mixed modes supports both of Server and
Client. The communication process of each mode is as below.
<TCP server mode>
Figure 4. TCP Server mode
At the TCP Server mode, WIZ110SR waits for the connection requests.
