Copyright © WIZnet All Rights Reserved
WIZ110SR | 19 page
3. Firmware Upload
①
Run „WIZ100SR/WIZ110SR Configuration Tool‟ program, and click “Search” button.
②
If the module is properly connected to the network, “Complete Searching” message and
MAC address will be displayed on the “Board List” as shown below Figure.
Figure 10. Board Search Window
③
Select a module shown in “Board list”, and click “Upload” button.
☞
Before uploading through Ethernet, you should set the network information of
WIZ110SR first by Configuration Tool program as shown above Fig 10. By using Ping test,
④
When the window as shown below Figure is displayed, select file for upload and click
“Open” button.
