wiwa Duomix 230, Руководство по эксплуатации

Страница: 28 / 46

28 Translation of the original operation manual
DUOMIX 230
DM230_BAoDB_en_1307 · rs
Transport, installation and assembly
4.3.1 Assembling spray hose and spray gun
WARNING
Components that do not comply with the maximum permissible operating
pressure may burst und cause severe injuries.
➤
Before assembling, check the maximum permissible pressure for the
spray hose and spray gun. lt must be higher than or equal to the maxi-
mum operating pressure of the unit as specified on the type plate.
Connect the spray hose to the material outlet of the
mixing unit (see example for standard mixing unit in
illustration at the left).
Connect the spray gun to the spray hose as described
in the operating manual for the spray gun.
Fig. 25: Assembling spray hose
4.3.2 Inserting the filter elements into the high pressure filter
Insert the filter elements suitable for the spraying material and the spraying
nozzle into the high pressure filters. For more information, see chapter 6.8 on
page 40.
4.3.3 Connecting the compressed air supply
To ensure an adequate air supply, the compressor capacity must match the
air requirements of the unit and the diameters of the air supply hoses must
match the inlet connections.
Operation with contaminated or moist compressed air causes damage to the
pneumatic system.
➤
Use only dried, oil-and dust-free air!
1. Make sure that the compressed air shut-off valve on the air maintenance
unit is closed and that all air pressure regulators have been fully regulated
back.
2. Connect the compressed air line to the air maintenance unit.
4.3.4 Grounding the unit
WARNING
The high flow velocities associated with the Airless spraying method may
cause static charging. Static discharges can cause fire and explosion.
➤
The owner of the unit must get the unit properly grounded.