WITTUR servogearless WSG-S2.3, Руководство по эксплуатации

Страница: 71 / 90

Mechanical installation 4
i
j
| BA 14.0197 | 11/2010
29
4.4.6 Assembly of the manual release (optional)
Note!
The manual release is installed when the spring−applied brake has been
mounted onto the end shield (see chapters 4.3.1 ... 4.3.4). The air gap of the
brake is adjusted to the rated air gap.
BFK464−XX−S−009.iso/dms
Fig. 12 Assembly of the manual release
12.1 Lever 12.6 Disc springs 12.8 Nuts
12.4 Stud bolts 12.7 Bushes 14 Brake
BFK464−XX−S−016.iso/dms BFK464−XX−S−015.iso/dms
1. Insert four stud bolts (12.4) into the bore holes of the transport safety bolts which
have been removed and screw down tight using a screw driver.
2. Locate the levers (12.1) onto the brake (14).
3. Place four disc springs (12.6) each opposed to each other onto the four bushes (12.7)
and insert the bushes into the bore holes of the levers (12.1).
4. Screw self−locking nuts (12.8) onto the stud bolts and tighten until dimension "s" has
been adjusted.