Wittkopp TwinLock 7220, Руководство пользователя

Страница: 39 / 96

TwinLock 7220
Version 1.08A 39
Attention:
The disarming procedure can only take place with the code card
and the mnemonic code!
The BAS user numbers are only linked to the logged-on chip cards
and have nothing to do with the user numbers of the individual
locks.
The BAS is disarmed before the locks are unlocked.
Remove the code card only when the system asks the user to do
so!
Error messages:
The BAS could not be disarmed.
The input “Disarm Block” at the TwinAlarm is set by the
BAS, so disarming is disabled.
The selected EMA user number is not identical to the user
number of the code card.
The code on the code card is wrong, i.e. the code card is
invalid!
Emergency shutdown of the BAS control
If it is no longer possible to disarm the BAS control via TwinLock, because the
available code cards are faulty or other technical errors have occurred, the BAS
control may, also for closed systems in this special case, be deactivated via the
system code.
Please note that this procedure will trigger an alarm as soon as the
locks are opened!
In the system menu, first the key F2,
then key 4 is pressed
Now enter the system code.
More see Chapter: „
6.11. Activate Arming Device TwinAlarm
In this case, the arming device must be deactivated.
*** TwinLock ***
21.05.09 1200
……
Disarm error !
……
Error code card
……
Disarm block !
……
Wrong card ID