4
Installation instructions Primor
3.4 Mounting input unit
3.4.1 Drill pattern Primor RE (lock is closing towards the right) - (closing towards the left inversely)
Ø 11,4
60
145
15
15
130
30
30
30
100
Opening for cable
2 x Fixing position for
screws M5 x 14
2 x Fixing position
for screws M5 x 18
• From the front 4 threaded holes M5 with sufficient depth thread and 1 through-hole (opening for cable/Spindle)
have to be drilled into the safe door.
3.4.2 Cable guidance Primor RE
3.4.3 Cable guidance/Plug position Primor RE
Spindle
O-ring
Lock
• Lead the connection cable through the Spindle.
• Push the cable and the O-ring in the direction of the arrow until the inset.
• Connect the plug of the cable with the plug on the circuit board. Attention: Don’t put the connection cable under tensile stress.
• Fix the input unit from the front with the enclosed cylinder screws M5.
• Install covering caps and battery compartment cover (see 3.2.1).
Содержание Primor 100
Страница 23: ...23 Installation instructions Primor ...
Страница 24: ...24 Installation instructions Primor ...