Wittkopp Primor 100, Руководство по установке

Страница: 14 / 24

14
Installation instructions Primor
8 Installation lock
Before mounting the lock the input unit has to be installed (see chapter 3 to 7).
Wittkopp electronic locks of the Primor series have got standard fixing points and can be mounted in all 4 directions (right-hand,
left-hand, up, down).
• The lock can be installed in all conventional safes.
• Depending on the model there can be optional used more locking elements (e.g. angle with bolts) additional to the existing
holes of the bolt. Please make sure that the lock and the connections operate properly.
• The electronic lock is maintenance free in normal domestic and office surroundings. After approx. 10,000 closures it is re-
commended to carry out a security and functional test of the electronic lock.
• For safety reasons it is not allowed to locate the electronic lock in the area where openings are (except Primor 100/2000).
• The electronic lock has to be protected against external attacks.
• It is recommended to protect all security relevant components of the high-security lock against tempering even when the
door is opened.
• Do not insert any lubricants or other substances into the electronic lock.
8.1 Constant bolt load
Primor 100/2000/3000/3010/3011
8.2 Bolt support load
Primor 100/2000/3000/3010/3011
17,3
41
66,5
F
17,3
41
66,5
F= 1000 N
F= 1000 N
• The maximum and constantly bolt load against bolt
closing direction may not exceed the following limits::
Primor 100 2.5N
Primor 2000 2.5N
Primor 3000/3010/3011 2.5N
• The load on the bolt must not exceed 1000 N.