BioBolt evo3 Manual Download

Page: 1 / 15

Table of Contents

1. Features and Technical Specifications:

2. Fingerprint Recognition Notes:

3. User Enrollment:

Enrolling Fingerprint & Password Users

Enrollment Options

Changing Master Code

Enroll Fingerprint Users at Random

Enroll Fingerprint User with User ID

Enroll Pass Code User

4. Lock Operation:

Unlocking Door with Fingerprint

Unlocking Door with a Pass Code

Locking/ Unlocking Door from the Inside

Locking Door from the Outside

5. Deleting Users:

Deleting Fingerprint Users with a User ID

Deleting ALL Fingerprint Users

Deleting Pass Code Users with User ID

Deleting ALL Pass Code Users

6. Frequently Asked Questions:

7. Troubleshooting the Lock:

8. Performing a Factory Default:

9. Accessing the Key Hole:

10. Technical Support:

11. Installation:

Preparing For Lock Installation

Adjusting the Tailpiece for Installation

Installing the BioBolt

BioBolt

evo3 Biometric Deadbolt

http://www.bioboltlock.com | Intelligent Biometric Controls, Inc. | v1.1

Summary of Contents for evo3
















Search results

Summary of Contents for evo3

Reviews:

Related manuals for evo3

Brands by name

Popular brands

BioBolt evo3, Manual

Search results

Summary of Contents for evo3

Reviews:

Related manuals for evo3

Brands by name

Popular brands