Safety
cyber
®
dynamic line
en-6
5022-D029179
Revision: 04
2.1 EC/EU Directive
deutsch
english
italiano
français
español
日本語
2
Safety
This instruction, in particular the safety notes, and the rules and regulations applicable at the usage
site are to be observed by all individuals working with the motor.
In addition to the safety instructions in this manual, also observe any (legal and otherwise)
applicable environmental and accident prevention rules and regulations (e.g. personal safety
equipment).
2.1
EC/EU Directive
The motor has been constructed in accordance with EC Directive 2009/125/EG in conjunction with
Regulation 640/2009. The motor is –if it is not a special motor –EC-compliant and therefore carries
the CE mark. Observe applicable regulations for electrical installation (e.g. wire gauge, fuses).
It is the responsibility of the plant builder to ensure that all requirements that apply to the entire
system are fulfilled.
The EC Declaration of Conformity is in the download area of our website http://wittenstein-cyber-
motor.de. Please contact our sales department if you have any questions. Always enter the serial
number (SN, current designation) or the product identification number (PIN, previous designation).
The motor and all its individual components are RoHS compliant according to the Directive 2011/
65 / EU, unless customer specific requirements make this directive void.
2.2
Dangers
The motor has been built in accordance with the current state of the art and the generally accepted
safety engineering practice.
The motor may be used for its intended purpose (ref. chapter 2.4 "Intended use") and in a flawless
condition with regard to safety only in order to avoid danger to the user or damage to the machine.
Read the general safety instructions before beginning work (see Chapter 2.7 "General safety
instructions").
2.3
Personnel
Only persons who have read and understood these instructions may carry out work on the motor.
2.4
Intended use
The motor is designed for use in industrial systems.
2.5
Guarantee and liability
Guarantee and liability claims are excluded for personal injury and material damage in case of
- Ignoring the information on transport and storage
- Improper use (misuse)
- Improper or neglected maintenance and repair
- Improper assembly / disassembly or improper operation
- Operation of the motor with defective protection devices and mechanisms
- Operation of a severely soiled motor
- Changes or modifications that have been realized without the written approval of
WITTENSTEIN cyber motor GmbH
2.6
Other applicable documents
You have already received the following documents for your specific motor:
- Dimensional drawing (5007–…)
- Motor speed and torque characteristics (5012–...)
- Data sheet – Encoder system (5093–...)
Please contact our Sales department for additional information. Always enter the serial number
(SN, current designation) or the product identification number (PIN, previous designation).
Содержание cyber dynamic 17
Страница 30: ......
