Manual
WITA HE + go.future 40-XX | 50-XX | 60-XX
35
10 Filling and venting the system
The system must be properly filled and vented.
To vent the pump, the pump should run at its
highest level for approx. 15 minutes.
After this procedure, you can set the pump
to the desired control mode.
Incorrect venting will result in increased noise
during pump and system operation.
Warning! Danger of burns!
Depending on the operating status of the system,
the entire pump can become very hot.
11 Maintenance/Service
Before carrying out maintenance, cleaning and repair work, disconnect the system
from the power supply and secure it against being switched on again by
unauthorized persons.
At high water temperatures and system pressures, wait for the pump
to cool down beforehand.
There is a risk of burns!
Advice
