50100935001_SKS-575(Ver2)Rev.02112012E
Disposal
19
Attention:
If for any reason the glass bulb of the lamp should be broken, then
you have to proceed as described in
2.3 Protective measures in case of a
broken lamp
, to protect your health and the environment.
Installation
Attention!
Check the new lamp before installation for fingerprints or damage
such as scratches or cracks. Do not start the lamp if there is visible damage.
Remove any fingerprints with an alcohol solution and a soft lint-free cloth.
1.
Open the protective packing of the new lamp. Make sure not to touch the glass
bulb with your fingers during installation. Use disposable gloves when handling
the lamp to avoid leaving fingerprints.
2.
Insert the lamp into the slot in the lamp holder 5 until it reaches the stop.
3.
Fix the lamp in this position.
4.
Put the front part of the searchlight back in place and fix it with the quick
releases.
5.
Dispose of the defective lamp properly as described in
2.2 How to handle metal
halide lamps.
8. Disposal
Electrical components contain substances which are hazardous for the environment.
Ensure proper disposal or send the defect parts to WISKA. The address is on the back
page of these instructions.
Pay particular attention to properly dispose of the lamps. To do so also read chapter
2.2
How to handle metal halide lamps.
Health risk
Under no circumstances may metal halide lamps be destroyed during disposal.
For this see also
2.3 Protective measures in case of a broken lamp.
Содержание SKS 575
