WISKA SKS 575, Руководство по эксплуатации, Страница: 12 / 24

50100935001_SKS-575(Ver2)Rev.02112012E
Installation
12
4. Installation
4.1 Unpacking
Check the delivery. Do not start the unit if there is transport damage or missing parts!
Contact WISKA or our sales partner in your country. The address can be found at the
back of these instructions or on the internet under www.wiska.de.
Think about the environment and send the packing for recycling!
4.2 Mounting
Mounting and installing the searchlight
.
1.
Four fixing holes can also be drilled here on a circle of 240 mm in diameter: see
chapter
3.3 Dimensions . In order to ensure that the searchlight can still be
rotated, it can be fastened with the adjustable clamping levers (centric hole in
the baseplate see drawing on the right side).
2. Position the searchlight baseplate and bolt it down.
3. Connect the earth cable.
Installation of the SKS 575
Risk of electric shock! Electrical connections may only be carried by a
qualified electrician. Please ensure that the mains connection is off and that
nobody can accidentally energise the connections during installation!
The circuit diagram is also included separately or can be found in chapter 3.5
Circuit diagram.
Electrical connection values
Mains voltage: 230 VAC, 50/60Hz.
Device fuse: 1 x 16 A (included with delivery)
1.
Bolt the searchlight down firmly through the holes.
2. Set the ball valve to the flow position and fasten the hose to the nozzle.
3. Connect the cable from the PSUH SKS to the voltage supply