6. Maintenance
6.1 Cleaning
Clean the front glass panel of the searchlight when required.
When cleaning, check if the fasteners are firmly in place and
check for rusting/corrosion.
No cleaning of searchlight interior is required. In the course of
use, slight discoloration of the reflector surface will occur. This
has no adverse effect on the unit and does not diminish the
power of the lamp.
Danger of blinding!
Make sure that nobody can turn on the
searchlight while cleaning.
7.
Replacing defective parts
7.1 Before you begin
1.
Turn the main switch S8 to OFF.
2.
Make sure the entire electrical system is dead and it can
not be turned on accidentally.
3.
Wait until the searchlight has cooled down.
4.
Read the chapter 2.2
Using Metal Halid lamps
5.
Be careful when handling the Metal Halid lamp and do not
break it.
SH400-575 Rev.230903E
Maintenance
23
SH400-57
5 Rev.
230903E
Содержание SH400
Страница 2: ...About this manual SH400 575 Rev 230903E 2 SH400 575 Rev 230903E ...
Страница 15: ...Power supply unit PSUH inside SH400 575 Rev 230903E Overview 15 SH400 575 Rev 230903E ...
Страница 17: ...Circuit diagram with drive unit and Remote control SH400 575 Rev 230903E Overview 17 SH400 575 Rev 230903E ...
