Wisenet HCB-6000 HCB-6000PH, Руководство пользователя

Страница: 30 / 41

30_ camera operation
camera operation
- GAMMA : The setting range is 0.35 ~ 1.0. The closer to 1.0 the setting is, the darker it gets.
- PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the
higher the PED level gets.
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness.
Increase or decrease the level of each mode to adjust the level of sharpness.
y
OFF : Released state
y
ON : The setting range is 1 ~ 32.
- RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
`
If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
y
DAY/NIGHT: You can display pictures in color or in black and white.
➊ If the SPECIAL menu screen is displayed, use the Function Setup switch so that
the arrow indicates ‘DAY/NIGHT’.
➋ Select a desired mode using the Function Setup switch according to the picture
display you want.
-
AUTO : The mode is switched
to ’Color‘ in a normal
environment, but switches
to ’B/W‘ mode when
ambient illumination is low.
To set up the switching
time for AUTO mode, press
the Function Setup switch. You can turn on or off the burst signal on B/W
mode.
y BURST MODE : Activate or deactivate the burst mode to maintain or remove
the color signal.
y DURATION : This function is used to select the brightness of light where
switching occurs.
AUTO SETUP
▶
1.
BURST MODE ON
2. DURATION NORMAL
3. DWELL TIME 30 SEC
4.
RETURN