Wisenet HCB-6000 HCB-6000PH, Руководство пользователя

Страница: 29 / 41

English_29
●
C
amer
a
Oper
a
ti
O
n
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.
➊ MM
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘COMM ADJ’.
➋ Select a desired mode using the
Function Setup switch.
- PROTOCOL :
Select the communication
SAMSUNG-T/PELCO-D/PELCO-P/
BOSCH/HONEYWELL/VICON/GE/
AD)
- CAM ID : Determines the camera's identification number (between 0 and 255).
- DISP ID: Determines whether camera ID is displayed or not.
- BAUD RATE : You can select 2400/4800/9600/19200/38400 bps .
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- COAX : You can select whether to use COAX communication.
- RETURN : Return to the SPECIAL menu.
y
IMAGE ADJ
❶ MM If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
❷ MM
Select a desired mode using the
Function Setup switch.
IMAGE SETUP
▶
1.
GAMMA
USER
2. PED LEVEL
I
IIIIIIIIIIIIIIIIIIII
5
3.
COLOR GAIN
IIIIIIIIIII
I
IIIIIIIII
50
4. H-REV OFF
5. V-REV OFF
6. SHARPNESS ON
7.
RETURN
COMM SETUP
▶
1.
PROTOCOL SAMSUNG-T
2.
CAM ID
I
IIIIIIIIIIIIIIIIIIII
1
3. DISP ID OFF
4.
BAUD RATE 9600
5. UART MODE 8-N-1
6.
RET PKT ENABLE
7.
COAX ON
8. RETURN