User Manual
8
•
Some conditions have to be respected to maintain the FCC and IC compliance of the devices in USA and Canada. Please
contact your reseller to have details.
•
For others countries, check the specific regulations regarding maximum EIRP and duty cycle allowed.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment complies with RSS102’s and FCC radiation exposure limits set forth for an uncontrolled environment
under the following conditions:
1. This equipment should be installed and operated such that a minimum separation distance of 20cm is maintained
between the radiator (antenna) and user’s/nearby person’s body at all times.
2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
11.3
Wirnet iFemtoCell 923MHz
(certification on going)
The Wirnet iFemtoCell 923
will be
compliant to:
IEC 60950-1:2005/A1:2009/A2:2013
CENELEC EN 60 950-1 (Ed. 2006/A11 : 2009/A1 : 2010/A12:2011/A2:2013)
AS/NZS 60950.1 : 2011
GB4943-2011
K60950-1
J60950-1
The Wirnet iFemtoCell 923
will also be
compliant to both FCC and CE regulations.
Applicable documents:
Article 3.2 of the RED Directive:
Applied standard(s):
o
EN 300 220-1, issue 3.1.1
o
EN 300 220-2, issue 3.1.1
o
EN 300 328, issue 2.1.1
The Wirnet iFemtoCell 923 is considered as a category 2 receiver according to the EN 300 220-1.
AS/NZS 4268 2017 : Radio equipment and systems – Short range devices – Limits and methods of measurement
ARIB STD-T108 - 920MHz-Band Telemeter, Telecontrol and Data Transmission Radio Equipment
Clause 2, Article 58-2 of Radio Waves Act (Republic of Korea)
IMDA Technical Specifications for Short Range Devices (IMDA TS SRD) – Issue 1 Rev 1, October 2016
The power supply of the Wirnet iFemtoCell 923 must be a limited power source.
•
Depending on the countries, check the specific regulations applying, especially regarding frequency range, maximum
EIRP, duty cycle allowed, maximum transmit duration, carrier sense mandatory or not…
•
Please contact your reseller to have details on specific rules for specific countries.
12
Contact
For additional information, please contact your reseller.
i
i
i
WARNING
