Wirepath Surveillance WPS-550-DOM-IP, Руководство пользователя

Страница: 35 / 63

35
© 2014 Wirepath Surveillance
WPS-550-DOM-IP Installation Manual
9.3.4.2. Add or Remove IP Addresses or Ranges
A. Enable IP Address Filtering to gain access to the settings:
B. Enter an IP address or range of addresses into the field and select whether to allow or deny access:
Single IP Address: IP Address Range:
C. After clicking the “Add” button, the new entry will be added to the list.
D. Click the “Remove” button to the right to remove an entry from the list.
9.3.4.3. Controlling Administrator Access
For installations where the Administrator account is only accessed from one computer, the IP address of the computer may be
reserved. Enabling this feature prevents modification of settings on the camera from any other IP address.
Note: If another device is issued the same IP address, the new device will be granted Admin access. Be sure to use a reserved or
static IP address for the computer, or Admin rights may be lost. If this occurs, a physical camera reset is required.
A. Check the box for “Allow Admin IP Address to always access this device”.
B. Enter the IP address for the Admin computer.