Wirepath Surveillance WPS-550-DOM-IP, Руководство пользователя

Страница: 15 / 63

15
© 2014 Wirepath Surveillance
WPS-550-DOM-IP Installation Manual
8. IP Camera Web Interface - Setup and Use
8.1. First Time Access Instructions
A. Connect the PC to the same local network (LAN) the camera is connected to.
B. Open the web browser and enter the IP address that was assigned to the camera. The address should include the port number
assigned to the camera if one was set. See the example:
• IP Address using default port: http://192.168.1.015
• IP Address using port 8015: http://192.168.1.015:8015
You may also access the web interface from the WPS-IP Installer software by double-clicking a camera in the device list.
C. A dialog box will open asking for a username and password. Default settings:
• Username: admin
• Password: admin
8.1.1. Recommendations for Best Web Viewing Performance
• As the number of open browser windows or tabs increases, the risk of slowed response time to the cameras increases. Avoid
keeping more than four separate browser windows open that are connected to cameras.
• Depending on the speed of the network and the Internet connection at the installation, it may be necessary to change video
streaming settings. If access is regularly interrupted or very slow, see section 9.4.4. Video Streaming 1 and 2 Setup to optimize
these settings.