Wirepath Surveillance WPS-300-DVR-16CH, Инструкция по установке и эксплуатации

Страница: 85 / 124

85
WPS-300-DVR-9CH & 16CH Installation and Users Manual
© 2011 Wirepath Surveillance
• DDNS PASSWORD
Enter the DDNS password if DDNS is used.
• WAP PICTURE QUALITY
WaP (Wireless Application Protocol) is a simple standard for remote devices (such as Smartphones) to
access the DVR. See Section 9.6 for more information on WAP.
• VIDEO STREAM
Video Stream (Dual Streaming) allows the user to choose the resolution and speed the video is
delivered to the remote device (see Section 9.4). This is especially helpful for remote devices on slower
networks. Reducing resolution sent to these devices will speed up the delivery of the video. To enable
Dual Streaming, select one of the four levels of QciF (Fair is the lowest quality while Superfine is the highest
quality). If Dual Streaming is used, the total system recording rate will be reduced. The default value is
Record, which means that Dual Streaming is not enabled and the output of the DVR to remote devices
will match the Best Rec Resolution set in Pre Camera (See Section 9.3.4).
Note: To use Dual Streaming in Internet Explorer, the user must select Extra Video Stream option in the
Modify menu of the Device List of the remote PC (See Section 9.4).
- QCIF Fair – Lowest QCIF Resolution
-
- QCIF Normal – Medium QCIF Resolution
- QciF Fine – High QCIF Resolution
- QCIF Super fine – Best QCIF Resolution