12
WPS-300-DVR-9CH & 16CH Installation and Users Manual
3.2 connectionS
To ensure proper performance and operation of the 300 DVR, it is recommended that all connections
and setup be performed by a qualified system installer.
3.2.1 BaSic connectionS
• CAMERAS
Connect the video output from cameras or other composite video sources using coaxial cable to
the Video In connectors. Set each of the DIP switches to ON unless the corresponding video output
terminal is connected.
• MAIN MONITOR/VGA OUTPUT
Connect the Main Monitor output (BNC) to a surveillance TV monitor, VGa output to a VgA monitor
or Flat Panel TV, or hDmi output to HD Flat Panel TV.
Note: No setup is required as all Main Outputs function simultaneously.
• POWER
Connect the included IEC power cord to surge protection or wall outlet.
3.2.2 oPtional connectionS
• AUDIO INPUT
Connect the audio input connector to the audio line-out from line level microphones or other audio
sources. Please make sure to associate the udio inputs with a camera in the Camera Setup as described
in
Section 6.2 accordingly. An audio input can only be associated with one camera.
• AUDIO OUTPUT
Connect the audio output connector to an amplifier and speakers.
• ALARM INPUTS
Connect the alarm inputs to nc and/or no sensors or security alarm panel relays. Please make sure
to setup the alarm configurations as described in Section 6.3 accordingly.
• ALARM OUTPUT
Connect the alarm output to either a nc or no type of device or system.
• etheRnet
Connect the Ethernet connector to a standard Ethernet cable for remote access via LAN or internet.
Please make sure to setup the related configurations as described in Section 6.10 Network Setup.
VGA
HDMI
ESATA
ALARM
OUT
G
G
G
G
-
+
G
RS-485
C
Cameras
Amplifier
Speakers
Microphone
Home Automation
Router
Motion
Sensor(s)
Siren
LCD Monitor/
Flat Panel TV
CRT Monitor
Содержание WPS-300-DVR-16CH
Страница 124: ...110824 2011 Wirepath Surveillance...