13
WPS-300-DVR-9CH & 16CH Installation and Users Manual
© 2011 Wirepath Surveillance
• USB 2.0 AND ESATA
Connect external storage devices such as USB thumb drives, DVD+RW drives or ESATA hard drives for
archiving video and audio.
• CAMERA LOOP OUTPUTS
Connect the BNC loop outputs to a dedicated local display (Sometimes referred to as Spot Monitors),
video distribution system, or home automation system touch panel.
• CALL-AUx OUTPUT
Connect the BNC Call-Aux output to Call-Aux input on additional DVRs when daisy chanined.
• MAIN-AUx OUTPUT
Used to daisy-chain multiple DVR Monitor Outputs. MAIN-AUx OUT has the same output as MAINOUT,
but can be switched to Main Aux Input through RS-485 keyboard control.
3.2.3 PtZ cameRa / home automation connectionS
• PTZ CAMERAS
Connect the RS-485 connector to PTZ camera(s) via an appropriate cable. The system supports a variety
of PTZ cameras and the OSD menu of Wirepath™ Surveillance cameras. Different PTZ cameras can coexist
in a system only if they support the same protocol and baud rate. Make sure to set unique PTZ IDs to the
cameras, the DVR and any other PTZ device. Setup each camera (Section 6.1), and RS485 (Section 6.9)
accordingly.
• HOME AUTOMATION SYSTEM
Connect the RS232 DSUB connector to a control port on a Home Automation System to control the DVR.
Please refer to Section 6.9 for setup and appendix e for control protocol.
*Communication PIN functionality can vary, refer to the manual for your Home Automation System
for proper PIN functionality.
DVR RS232 DSUB
Male Connection
Home Automation
Control Port
2 3
5
300 Series
DVR
DVR Home
Automation System*
Pin 2
TxD (Data
Transmit)
Data Receive
Pin 3
RxD (Data
Receive)
Data Transmit
Pin 5
gND
gND
For PtZ Devices
For Wirepath
Surveilance Cameras
RS485 +
RxD + (Data +)
Po
RS485 -
RxD + (Data -)
Negative -
GnD
gND
No Connection
VGA
HDMI
ESATA
ALARM
OUT
G
G
G
G
-
+
G
RS-485
C
External ESATA
Hard Disk Drive
Thumb Drive
DVD+RW
oR
Содержание WPS-300-DVR-16CH
Страница 124: ...110824 2011 Wirepath Surveillance...