Wirepath Surveillance WPS-300-DVR-16CH, Инструкция по установке и эксплуатации

Страница: 50 / 124

50
WPS-300-DVR-9CH & 16CH Installation and Users Manual
• SETUP RS-232/422/485
Allows the user access to RS485 setup.
• SETUP NETWORK
Allows the user access to Network Setup.
• SETUP FACTORY DEFAULTS
Allows the user to restore factory defaults to all setup related configurations.
• SOFTWARE UPGRADE
Allows the user upgrade the DVR software.
• SHUTDOWN
Allows the user to Shutdown the DVR.
6.8 SyStem SetuP
The System Setup allows the administrator to set the system time, time zone, time synchronization,
language, etc.
In the Setup menu display, press ▲▼◄► on the front panel of the DVR or on the remote to change the
highlighted option to System, and then press enteR to display System Setup as shown.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item.
Alternatively use the mouse to select an item.
• ESC
Press the eSc button on the front panel of the DVR or remote control to escape from this menu and
return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.” If
the contents in this menu have been modified, a Save dialog box will be displayed requesting the user
to save the changes. Press enteR on the front panel of the DVR or remote control to exit and save, eSc
to exit without saving. Another method to escape is to use the mouse to “right-click” and exit the
sub menu.