83
WPS-165-DVR-4CH Installation and Users Manual
Using the WirepathDNS is easy. Select WirepathDNS from the list and enter the client name or other unique
string in the URL.
When exiting the Network menu, confirm the changes. A DDNS service is setup automatically. See IE
Interface Setup in Appendix E – WirepathDNS Setup for details on using WirepathDNS.
•
URL
Enter the DDNS URL if DDNS is used. – Enter Client Name or System Name to identify the DVR.
•
DDNS Username
Enter the DDNS username if DDNS is used. – Not used unless an existing DDNS other than WirepathDNS
service is configured.
• DDNS Password
Enter the DDNS password if DDNS is used. – Not used unless an existing DDNS other than WirepathDNS
service is configured.
ADVANCED NETWORK SETTINGS
• Control Port
Default Port is 67
• HTTP Port
Default Port is 80
• Data Port
Default Port is 68.
• UPNP Port Forwarding
When enabled in conjunction with a supported UPNP router, port forwarding of the DVR in the router
settings will be done automatically
• WAP Picture Quality
WAP (Wireless Application Protocol) is a simple standard for remote devices (such as Smartphones) to
access the DVR. See Section 6.11.3 for more information on WAP.
• Video Stream Resolution
Allows selection of Video Stream Resolution. If Record is selected, the DVR will stream video at the same
resolution as the Record setting (See Section 6.1). Lower resolutions will allow an increased speed of video
delivery to remote devices
• Video Stream
Video Stream allows the user to choose the compression rate of the video being delivered to a remote
device (see Section 9.4). This is especially helpful for remote devices on slower networks. Increasing
compression of video sent to these devices will speed up the delivery of the video. To enable Video Stream,
select one of the four levels of compression. (Fair is the lowest quality while Superfine is the highest quality.)
If the compressed stream is used, the frame rate supplied to each stream will be reduced.
NOTE: To use the compressed stream in Internet Explorer, the user must select Extra Video Stream option in
the Modify menu of the Device List of the remote PC (See Section 9.5).
- QCIF Fair – Lowest QCIF Resolution -
- QCIF Normal – Medium QCIF Resolution
- QCIF Fine – High QCIF Resolution
- QCIF Super Fine – Best QCIF Resolution
Содержание WPS-165-DVR
Страница 111: ...141027_1000 2014 Wirepath Surveillance...