76
11.5
Keyboard System Connections
11.6
CONSIDERATIONS
SYSTEM ID
: DVR identification number. It can be set up on SYSTEM ID of SETUP>SYSTEM>Information page.
Camera ID
: Camera identification number defined by the Camera jumper setting
-
It should be set up with the identical ID on SETUP>DEVICES>Cam/PTZ page.
-
Camera jumper ID, ID given from DVR setup ->DEVICES->CAM/PTZ, and ID controlled at CP1200A should be identical.
Please use the number key on left side of the Keyboard
for number input (―short key‖)
-
It may not operate appropriately because it is used to select Device.
The
Set
key is used for entering Keyboard menu.(long on key)
11.7
Display Channel Change
The numbers to be selected are different according to the DVR control mode and PTZ control mode.
DVR control mode
When KBD : (SYSTEM ID) displays on OSD screen, it is DVR control mode.
The applicable channel pops up if you press the Channel ―ENT‖(short) key.
You can select the channel number of 1 to 16 according to the DVR model.
PTZ control mode
When a disk recording capacity displays on OSD screen, it is PTZ control mode.(Default)
If you press Camera ID + ―ENT‖(Long) key, camera image of the applicable ID pops up. PTZ control is available.
You can select the Camera ID number of 1 to 255 according to the camera ID set up.
The method to input the number follows as;
ex)
Ch. 8 => 8 and ―ENT‖ Ch.16 => 1, 6 and ―ENT‖
ID 8 => 8 and ―ENT‖ ID 255 => 2, 5, 5 and ―ENT‖
The key combination should be recognized on the DVR of receiving mode.
PTZ # 1
PTZ # 2
DVR # 1
PTZ # 3
PTZ # 4
DVR # 2
Max. 255 devices
