2. Operating the S-Box
Make sure that your computer is set to request an IP address from
the S-Box using DHCP. If not, see Sections 4.1 and 5.1 of this
handbook.
If you see the screen below then the User Access Control has been
enabled. This requires a password to access the S-Box User
Interface - other functions of the S-Box will still be running but you
will not be able to start or stop connections. Please see Chapter 4.4 -
Access Control - for more details.
2.3 Navigating Around the S-Box User Interface
The User Interface functions are grouped under three tabs:
The CONNECT tab is used to connect and disconnect from
the internet and to view the status of the current connection.
The SETTINGS tab is used to manage the S-Box and view S-
Box status information under three tabs:
►
The UPLINK tab allows editing of existing uplinks and
creation of new uplinks.
►
The DOWNLINK tab provides downlink status
information.
►
The GENERAL TAB provides access to S-Box network
addresses, S-Box status information, access control,
technical configuration options, the update button and
the shutdown button.
The STATS tab allows access to historical usage information.
Page 5
