2. Operating the S-Box
2.2 Accessing the S-Box User Interface
Once the S-Box has been installed and is turned on you can manage
both the S-Box and your internet connection through the User
Interface. The User Interface enables functions such as connecting,
disconnecting, switching uplinks, switching satellite, viewing
connection statistics, etc to be performed through a web browser on
any connected computer.
To access the S-Box User Interface:
Tip
:
For easy access to the
User Interface set it up
as a shortcut or
favourite at the top of
your web browser.
1.
Open a web browser on a
computer connected to the S-Box.
2.
Type “wiredocean” in the address
bar.
3. Press
Enter.
This will take you to the User Interface shown below.
Not all versions of all web browsers work in exactly the same way, so
if typing “wiredocean” doesn’t get a response you may need to enter
an IP address instead
.
The S-Box is shipped with the default IP
address of 192.168.1.1, so try typing “http://192.168.1.1” instead of
“wiredocean”
.
Page 4
