When the threshold of cleave angle error is exceeded an error message
is displayed
：
“
Left Fiber End-face badness
”
or
“
Right Fiber End-face
badness
”，
Then redo cleave fiber.
Fig.4-10
调芯状态
Fig.4-10
State of align fiber
a
Note
：
To change threshold of cleave angle error
，
refer to page
51
§
6
．
5 perfect program
（
3
）
Heating with arc discharge
After aligning the fibers, the splicer will produce a high voltage
arc discharge to fuse the fibers together. During arc discharge,
observe the fiber image on the monitor screen. If some part of the image
exhibits an extremely bright glow (hot spot),which is
created by burning contaminants located on the surface or end-face of
the glass, there is a possibility of the fiber core will be deformed.
Although deformation can be detected by the loss estimation function,a
re-splice is recommended.
Fig.4-11 Fibers Being Spliced
（
4
）
Splice Inspection
When the spliced state is abnormal
，
the splicer displays an
errormessage
“
Splice Lost
”
.a re-splice is recommended.
a
Note
：
Best to program test before splicing, select an appropriate
state
，
Avoidance appear this phenomenon. Afresh splicer test
if appear this phenomenon.
Page 27
Left Fiber
Left/Right fiber incise End-face
A
Auto
O
SM 09:12:23
Align Fiber
1
X
1
Y
Right Fiber
1
Auto
SM
11
09:10:19
1
Arc
…
1
X
1
Y
Page 28
