Using the SFI Menus
ProCam 1500 SFI Manual
10
Ch 3
1095900
To get into Initialization mode, turn the Program/Run key to "program" and then press
both the left and right "ANGLE-OFF" keys at the same time for one second. (See "Using
the keyboard" in Chapter 3 of the ProCam 1500 user manual)
NOTE
Before changing modes (for instance -- from Initialization to
Program), make sure your screen shows the first display in the
mode you are in. If that display is not shown, nothing will happen
when you turn the Program /Run key. In that case, keep hitting
the RESET key. When the first display in the mode is reached,
you will instantly switch to the new mode.
Feed Parameters
Here is the first display in Initialization mode. From this display, select "Feed
parameters". (Figure 3-1).
INITIALIZATION
MENU
RESOLVER ZERO
POSITION SENSOR
COMMUNICATIONS
SELECT CAM NAMES
SECURITY ACCESS
BRAKE MONITOR
AUTO ADVANCE
FEED PARAMETERS
USE CURSOR KEYS TO
SELECT, ENTER TO
ACCESS, SWITCH TO
RUN WHEN DONE
Figure 3-1 Selecting "Feed parameters" from the Initialization menu
SELECT = HIG ENTER
When we say SELECT in this manual, it means use the cursor keys
to highlight the item and press ENTER. See Chapter 3 in the
ProCam 1500 user manual for more information.
Once you have selected "Feed parameters", here is the display you will see:
FEED INITIALIZE
MENU
CHANGE GROUP 1
CHANGE GROUP 2
CHANGE GROUP 3
CHANGE GROUP 4
CHECK SETUP
USE CURSOR KEYS TO
SELECT, ENTER TO
ACCESS, PRESS
RESET WHEN DONE
Figure 3-2 Feed Initialize menu
