P A G E
|
15
Wintex Agro, Vilhelmsborgvej 15, DK-7700 Thisted
+45 97990800, [email protected], www.wintexagro.com
15.
DISMOUNTING THE ACCUMULATOR
Loosen the screws carefully.
Note: There are two screws in each hole.
16.
CONTROLLING THE ACCUMULATOR
Put a long rod down the hole the accumulator to check if the accumulator is
pressurized.
If the diaphragm can be pushed a lot, the accumulator must be charged with
Nitrogen or the diaphragm is defective.
In case of a defective diaphragm, the accumulator must be replaced
Loosen the charging screw.
If the accumulator is in order, you can hear a whistling sound of Nitrogen. In this
case merely recharge the accumulator.
