P A G E
|
4
Wintex Agro, Vilhelmsborgvej 15, DK-7700 Thisted
+45 97990800, [email protected], www.wintexagro.com
When adjusting the depth, it might be helpful to use the marked starting points at 30 cm, 60 cm and
90 cm from which the desired depth can be measured and then adjusted.
4.
INTERRUPTING THE PROCESS
Due to various reasons it might be necessary to interrupt the process. In this case just deactivate the
foot switch, and the process will stop immediately. When reactivating the foot switch and the brake
at the same time, the probe will go back into start position. The soil will be discarded and not
filled into the soil boxes.
If the soil sampler is delivered with a remote control, the process will be interrupted by activating the
stop switch of the remote control instead.
5.
REPLACEMENT OF O-RING, SCRAPER AND PROBE
Revolving platform
O-ring
Scraper
REPLACEMENT OF PROBE
Remove the soil boxes, and unscrew the six bolts. One half of the plate can now be removed.
Unscrew the three bolts. The revolving platform can now be pulled down along the probe.
Caution: The probe has sharp edges!
