Wintex Agro 3000 Скачать руководство пользователя страница 6

Страница: 6 / 17

P A G E

Wintex Agro, Vilhelmsborgvej 15, DK-7700 Thisted

+45 97990800, [email protected], www.wintexagro.com

ADJUSTMENT OF CHAIN PROBE UP/DOWN

Move the probe ca. 20 cm down. The chain can now be adjusted by tightening the bolts.

ACTIVATING THE HYDRAULIC VALVES MANUALLY

Soil sampler up/down:

The soil sampler goes down when pressing the valve. The soil sampler goes up when pulling the valve.

Probe up/down:

The probe goes down when pulling the valve. The probe goes up when pushing the valve.

Rotation

Screw counter-clockwise to activate the rotation process. Then press the main valve.

Important: Re-set the button into start position after use.

Do always activate the main valve by pressing it down using a screw driver or another tool when activating

the other functions.

ADJUSTING THE HYDRAULICS

ADJUSTING THE MAIN PRESSURE

Start the motor with max. r.p.m. Press the main valve. The manometer must show 120 bar.

This valve is for adjusting the main pressure. The main pressure is pre-set on 120 bar. It must only be

adjusted after signing a written agreement with Wintex Agro.

Fuse: There is a 7.5 amp fuse for current control in the box and a 15 amp fuse for the oil cooler.

Содержание 3000


















Результаты поиска

Содержание 3000

Отзывы:

Похожие инструкции для 3000

Бренды по названию

Популярные бренды

Wintex Agro 3000, Инструкция по эксплуатации

Результаты поиска

Содержание 3000

Отзывы:

Похожие инструкции для 3000

Бренды по названию

Популярные бренды