background image

SYS-ITX-N-3800/Warranty Information

v1.0

www.winsystems.com

Page 37

Appendix B. Warranty Information

WINSYSTEMS warrants that for a period of two (2) years from the date of shipment, any Products and Software 

purchased or licensed hereunder which have been developed or manufactured by WINSYSTEMS shall be free of 

any defects and shall perform substantially in accordance with WINSYSTEMS' specifications therefor. With respect 

to any Products or Software purchased or licensed hereunder which have been developed or manufactured by 

others, WINSYSTEMS shall transfer and assign to Customer any warranty of such manufacturer or developer held 

by WINSYSTEMS, provided that the warranty, if any, may be assigned. The sole obligation of WINSYSTEMS for any 

breach of warranty contained herein shall be, at its option, either (i) to repair or replace at its expense any 

materially defective Products or Software, or (ii) to take back such Products and Software and refund the Customer 

the purchase price and any license fees paid for the same. Customer shall pay all freight, duty, broker's fees, 

insurance, charges and other fees and charges for the return of any Products or Software to WINSYSTEMS under 

this warranty. WINSYSTEMS shall pay freight and insurance charges for any repaired or replaced Products or 

Software thereafter delivered to Customer within the United States. All fees and costs for shipment outside of the 

United States shall be paid by Customer. The foregoing warranty shall not apply to any Products or Software which 

have been subject to abuse, misuse, vandalism, accident, alteration, neglect, unauthorized repair or improper 

installation.
THERE ARE NO WARRANTIES BY WINSYSTEMS EXCEPT AS STATED HEREIN. THERE ARE NO OTHER WARRANTIES 

EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 

FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WINSYSTEMS BE LIABLE FOR CONSEQUENTIAL, 

INCIDENTAL OR SPECIAL DAMAGES FOR LOSS OF DATA, PROFITS OR GOODWILL. WINSYSTEMS' MAXIMUM LIABILITY 

FOR ANY BREACH OF THIS AGREEMENT OR OTHER CLAIM RELATED TO ANY PRODUCTS, SOFTWARE, OR THE 

SUBJECT MATTER HEREOF, SHALL NOT EXCEED THE PURCHASE PRICE OR LICENSE FEE PAID BY CUSTOMER TO 

WINSYSTEMS FOR THE PRODUCTS OR SOFTWARE OR PORTION THEREOF TO WHICH SUCH BREACH OR CLAIM 

PERTAINS.
Title to the Products shall remain vested in WINSYSTEMS until complete payment is made by Customer. Title to any 

Software shall remain vested in WINSYSTEMS, or WINSYSTEMS' licensor from whom WINSYSTEMS has obtained 

marketing rights, both before, during and after the term of the License. Nonpayment when due of the purchase 

price for any Products or the License fees for any Software, or, if applicable, taxes and/or the cost of any freight 

and insurance for any Products and/or Software, shall entitle WINSYSTEMS to take possession of the Products and/

or Software without notice to Customer or prejudice to WINSYSTEMS' rights under contract or any other legal 

remedy.
Until title to the Products pass in accordance with the provision set out above, except with the prior written 

approval of WINSYSTEMS, no Products shall be modified, altered, moved or in any way assigned, sublet, 

mortgaged or charged nor may Customer part with possession of all or part of the same.
There are no understandings, agreements or representations, express or implied, other than those set forth 

herein. This Order embodies the entire agreement between the parties and may be waived, amended or 

supplemented only by a written instrument executed jointly by WINSYSTEMS and Customer as evidenced only by 

the signature of duly authorized officers of each party. The foregoing terms and conditions of any order which may 

be issued by Customer for the purchase of Products or licensing of Software hereunder.
In the event this Order is placed in the hands of an attorney or collection agency by WINSYSTEMS to collect any 

sums due hereunder to WINSYSTEMS, Customer shall pay all reasonable attorney's fees, expenses, collection and 

court costs incurred by WINSYSTEMS.
THIS AGREEMENT SHALL BE GOVERNED AND CONSTRUED UNDER THE TEXAS UNIFORM COMMERCIAL CODE AND 

THE APPLICABLE LAWS OF THE STATE OF TEXAS. THE PARTIES ACKNOWLEDGE THAT ANY ACTION BROUGHT 

HEREUNDER SHALL ONLY BE BROUGHT IN A COURT OF COMPETENT JURISDICTION IN TARRANT COUNTY, TEXAS.

Warranty Service

1. To obtain service under this warranty, obtain a return authorization number. In the United States, contact the 

WINSYSTEMS Service Center for a return authorization number. Outside the United States, contact your local 

sales agent for a return authorization number.

2. You must send the product postage prepaid and insured. You must enclose the products in an anti-static bag 

to protect from damage by static electricity. WINSYSTEMS is not responsible for damage to the product due to 

static electricity.

Содержание SYS-ITX-N-3800






































Отзывы: